Just unboxed your LR Keypad? Wire it in and pair your phone in about five minutes. Start here →

Your phone is the CAN keypad now.

Stop cutting your dash for £400 button pads. LR Keypad turns your iPhone and Apple Watch into a fully customisable, wireless motorsport CAN keypad with live ECU LED feedback. A small gateway plugs into the CAN bus; the app does the rest.

£160 inc. UK VAT
Complete Kit Included: LR Keypad gateway + genuine TE Deutsch DT06-6S mating connector, wedgelock, and solid barrel pins.
Tracked Worldwide Delivery
Download LR Keypad on the App Store

The LR Keypad app for iPhone & Apple Watch · free

The LR Keypad gateway: a dual-bus CAN module with a sealed Deutsch connector LR Keypad app on iPhone: a race keypad with Anti-Lag, Traction, Fan and Fuel Pump lit
Dual CAN · Bluetooth 5.0 · TE Deutsch Sealed Harness · 9–24V DC
01 / DASHBOARD

No Dashboard Clutter

Traditional motorsport keypads cost hundreds, eat up dash space, and require cutting holes in your interior. Put the keypad on the screen you already own. Mount your phone on the dash or cage and you are done.

02 / FEEDBACK

Live ECU LED Feedback

Tap a button, it fires the CAN frame, the ECU enables the function, and the ECU's status frame lights up the virtual LED indicator on your screen. The button actually knows when the function is active.

03 / CONVENIENCE

Instant Layout Changes

Need to swap high boost for water injection? No peeling off silicone button inserts or hooking up a PC. Change button labels, colours, and behaviours in ten seconds right from the pit lane.

/// MOTORSPORT BUTTON MODES

Four Genuine Keypad Behaviours

The buttons aren't just generic screen taps. Each key is configurable with the same behaviours found on professional motorsport switch panels.

01 / LATCHING

Toggle Mode

Tap on, tap off. The button latches state. Virtual status LED illuminates when active. Mark it Keep On and it stays on if your phone disconnects.

Fans · Fuel Pumps · Lights · Anti-Lag Arm
02 / PRESS-AND-HOLD

Momentary Mode

Active only while your thumb is on the button. Auto-releases immediately when lifted.

Starter · Horn · Upshift Blip · Transbrake
03 / TIMED COUNTDOWN

Timed Hold Mode

Arms for a set duration, with the button color draining down like a fuse before auto-releasing.

Launch Control · Pit Limiter · Burnout Window
04 / MULTI-POSITION

Rotary Mode

Each tap steps to the next position, just like a rotary switch. Up to eight positions. Haltech keypads.

Boost Map · Traction Level · Launch RPM
/// KEYPAD PROTOCOL SUPPORT

ECU & Transmission Integration

The gateway drops straight into the keypad conversations your ECU and gearbox controller already speak.

✓ Native Production Support

Supported Out of the Box

Haltech (Elite & Nexus) Native 15-Key Emulation

Emulates an official Haltech CAN Keypad directly in NSP. Shows up as Keypad 1. Full bidirectional control for launch control, boost tables, anti-lag, and cooling overrides with live Haltech status LED feedback.

CANTCU (BMW 8HP & DCT) Gearbox Mode Keypad

Full transmission keypad integration. Control Park, Reverse, Neutral, Drive, Manual mode, Burnout mode, and transbrake directly from your phone screen.

TurboLamik (ZF 8HP TCU) TCU Shift Keypad

Shift mode switching and transmission preset selection for standalone ZF 8HP conversions running TurboLamik firmware.

β New in Firmware 2.0

Supported, in Beta

MaxxECU Blink PKP Keypad

Emulates the Blink PKP keypad MaxxECU supports, with key lights, for user functions, launch control arming, and boost selection.

Link ECU (G4X & G4+) Blink PKP Keypad

Emulates the Blink PKP CANopen keypad Link supports, with key lights, for tables, launch control, and general auxiliary switching in PCLink.

ECUMaster (EMU Black & PMU) CAN Keyboard

Emulates the ECUMaster CAN keyboard. Key presses are supported; ECUMaster doesn't send key lights back, so the virtual LEDs stay off.

Keypads Two at Once · Up to 15 Keys
Dual Physical Buses CAN 1 (CAN-FD) + CAN 2
Power & Wiring 9–24V DC · Deutsch DT
Safety Failsafe Auto-Release on Disconnect